*Variable speed control: 3,000 RPM up to 20,000 RPM
*Voltage: 220V~240V / 50HZ (UK plug)
*Working Temperature: 0 - 50
*Always unplug the tool when you change accessory.
*Do not engage the shaft lock button while the tool is running.
*Do not use teh machine near water of place it in water. If motor falls into water, unplug it immediately and do not touch the water.
*Do not touch the bit or collet after using it because the bit and collet are too hot tobe touched by bare hands.
*When not used, tool must be stored in a dry place and kept beyond the reach of children.
-This tool is design for carver, engrave, rout, grind, sharpen, sand, polish, drill and more, Easy to use in any position, Light weight design for precise operation. -The nail drill can be used for natural nails as well as artificial nails.
-Unplug the tool form electrical outlet before loading a bit.
-Press shaft lock button. Use the collet wrench to loosen the collet nut. Insert the bit (not included), and tighten the collet securely. But avoid excess tightening of the collet nut and never use a damaged bit.
-There is an ON/OFF switch. When the switch is on, the tool runs at 20000RPM. There is aswitch indicator with an orange line on it. Slide the switch to find the speed needed from 18000-20000 RPM. Slide the switch to the black dot for complete stop.
How to use:
- Emery tool: professionally shapes nails and makes the edge smooth
-Buffing tool: polishes nails to a healthy shine, push back cuticles and stimulate the growth of nails
-Shaping tool: flatten and smooth extra thick nails and rough surface
-Fine shaping tool: carves into corners and spots which are hard to reach
-Cuticle pusher: remove dead skin, keeps cuticles neat and cleans under nails